**
show int xe/0/9 extensive | match "Framing error'**


  * #b3dc10
  * 
  * 
  * Top >>> exit 
  * 
  * 
  * root
  * cli
  * edit or config
  * 
  * 
  * cisco config mode do junus run and mkt \ all 
  * 
  * 
  * run request system zeroize  < system defolt >
  * 
  * 
  *  set system root-authentication plain-text-password 
  * 
  * 
  * root> show interfaces terse   < int status check >
  * run show configuration | match inter
  * run show configuration | match inter | display set
  * 
  * 
  * 
  * 
  *  commit confirmed 2 <<< only >>>
  * 
  * 
  * 
  * 
  *  configure exclusive 
  *  
  *   configure private
  *   
  *   
  *    edit protocols ospf area 0
  *    set interface em0 passive
  *    set interface em1 interface-type p2p
  * show
  * 
  * 
  * 
  * 
  * root# show | display set
  * set protocols ospf area 0.0.0.0 interface em0.0 passive
  * set protocols ospf area 0.0.0.0 interface em1.0 interface-type p2p
  * 
  * 
  * [edit protocols ospf area 0.0.0.0]
  * 
  * 
  * 
  * 
  * 
  * 
  * exit mane full back 
  * 
  * 
  * up = one step back up 2 = 2 stape back 
  * 
  * 
  * top and exit same 
  * 
  * 
  * =====================================router portt down and up ===
  * [edit interfaces em0]
  * root# set disable                 //// shutdown
  * 
  * 
  * [edit interfaces em0]
  * root# show
  * disable;
  * 
  * 
  * [edit interfaces em0]
  * root# de
  *         ^
  * 'de' is ambiguous.
  * Possible completions:
  *   deactivate           Add the inactive tag to a statement
  *   delete               Delete a data element
  * [edit interfaces em0]
  * root# delete disable         //// no shutdown
  * 
  * 
  * [edit interfaces em0]
  * root# show
  * 
  * 
  * [edit interfaces em0]
  * 
  * 
  *  run show interfaces em0 terse
  *  
  * ============================================== exta slot up korle ===
  * root# run show chassis hardware ?
  * Possible completions:
  *   <[Enter]>            Execute this command
  *   clei-models          Display CLEI barcode and model number for orderable FRUs
  *   detail               Include RAM and disk information in output
  *   extensive            Display ID EEPROM information
  *   models               Display serial number and model number for orderable FRUs
  *   |                    Pipe through a command
  * [edit interfaces em0]
  * root# run show chassis hardware fpc 2
  * 
  * 
  * ping command
  * 
  * 
  * run ping 1.1.1.1 source 5.5.5.5 count 100 rapid size 1000
  * 
  * 
  *  run show system uptime
  *  
  *  root# run show arp
  * 
  * 
  *  
  *  root# show | display set
  * set routing-options static route 10.0.0.1/32 next-hop 11.0.0.1
  *  
  *  
  *  commit check
  * 
  * 
  * 
  * 
  * 
  * 
  * 
  * 
  * 
  * 
  * 
  * 
  * 
  * 
  * 
  * 
  * sinha@sinhaFirewaLL# run show configuration | match inter | display set
  * set system services web-management http interface ge-0/0/0.0
  * set system services web-management http interface ge-0/0/1.0
  * set system syslog file interactive-commands interactive-commands error
  * set interfaces ge-0/0/0 unit 0 family inet address 172.168.0.1/24
  * set interfaces ge-0/0/1 unit 0 family inet address 103.16.73.253/29
  * set interfaces lo0 unit 0 family inet address 127.0.0.1/32
  * set security nat source rule-set internal-to-internet from zone trust
  * set security nat source rule-set internal-to-internet to zone untrust
  * set security nat source rule-set internal-to-internet rule internet-access match source-address 0.0.0.0/0
  * set security nat source rule-set internal-to-internet rule internet-access match destination-address 0.0.0.0/0
  * set security nat source rule-set internal-to-internet rule internet-access then source-nat interface
  * set security zones security-zone trust interfaces ge-0/0/0.0 host-inbound-traffic system-services http
  * set security zones security-zone trust interfaces ge-0/0/0.0 host-inbound-traffic system-services https
  * set security zones security-zone trust interfaces ge-0/0/0.0 host-inbound-traffic system-services ssh
  * set security zones security-zone trust interfaces ge-0/0/0.0 host-inbound-traffic system-services telnet
  * set security zones security-zone trust interfaces ge-0/0/0.0 host-inbound-traffic system-services dhcp
  * set security zones security-zone trust interfaces ge-0/0/0.0 host-inbound-traffic system-services all
  * set security zones security-zone untrust interfaces ge-0/0/1.0 host-inbound-traffic system-services all
  * 
  * 
  * 
  * 
  * 
  * 
  * 
  * 
  * 
  * 
  * sinha@sinhaFirewaLL# show | display set
  * set version 9.5R1.8
  * set system host-name sinhaFirewaLL
  * set system root-authentication encrypted-password "$1$6Kgj7GB7$exUgGdgzemxBbosZ73ff9."
  * set system name-server 8.8.8.8
  * set system name-server 8.8.4.4
  * set system name-server 4.2.2.2
  * set system login user sinha full-name sinha
  * set system login user sinha uid 2004
  * set system login user sinha class superuser
  * set system login user sinha authentication encrypted-password "$1$Clf1Mo/A$sthTOPYb0GZAuUAkcNyW/1"
  * set system services ssh
  * set system services xnm-clear-text
  * set system services web-management http interface ge-0/0/0.0
  * set system services web-management http interface ge-0/0/1.0
  * set system syslog user * any emergency
  * set system syslog file messages any critical
  * set system syslog file messages authorization info
  * set system syslog file interactive-commands interactive-commands error
  * set system max-configurations-on-flash 5
  * set system max-configuration-rollbacks 5
  * set system license autoupdate url https://ae1.juniper.net/junos/key_retrieval
  * set interfaces ge-0/0/0 unit 0 family inet address 172.168.0.1/24
  * set interfaces ge-0/0/1 unit 0 family inet address 103.16.73.253/29
  * set interfaces lo0 unit 0 family inet address 127.0.0.1/32
  * set routing-options static route 0.0.0.0/0 next-hop 103.16.73.249
  * set security nat source rule-set internal-to-internet from zone trust
  * set security nat source rule-set internal-to-internet to zone untrust
  * set security nat source rule-set internal-to-internet rule internet-access match source-address 0.0.0.0/0
  * set security nat source rule-set internal-to-internet rule internet-access match destination-address 0.0.0.0/0
  * set security nat source rule-set internal-to-internet rule internet-access then source-nat interface
  * set security screen ids-option untrust-screen icmp ping-death
  * set security screen ids-option untrust-screen ip source-route-option
  * set security screen ids-option untrust-screen ip tear-drop
  * set security screen ids-option untrust-screen tcp syn-flood alarm-threshold 1024
  * set security screen ids-option untrust-screen tcp syn-flood attack-threshold 200
  * set security screen ids-option untrust-screen tcp syn-flood source-threshold 1024
  * set security screen ids-option untrust-screen tcp syn-flood destination-threshold 2048
  * set security screen ids-option untrust-screen tcp syn-flood queue-size 2000
  * set security screen ids-option untrust-screen tcp syn-flood timeout 20
  * set security screen ids-option untrust-screen tcp land
  * set security zones security-zone trust tcp-rst
  * set security zones security-zone trust host-inbound-traffic system-services all
  * set security zones security-zone trust host-inbound-traffic protocols all
  * set security zones security-zone trust interfaces ge-0/0/0.0 host-inbound-traffic system-services http
  * set security zones security-zone trust interfaces ge-0/0/0.0 host-inbound-traffic system-services https
  * set security zones security-zone trust interfaces ge-0/0/0.0 host-inbound-traffic system-services ssh
  * set security zones security-zone trust interfaces ge-0/0/0.0 host-inbound-traffic system-services telnet
  * set security zones security-zone trust interfaces ge-0/0/0.0 host-inbound-traffic system-services dhcp
  * set security zones security-zone trust interfaces ge-0/0/0.0 host-inbound-traffic system-services all
  * set security zones security-zone untrust screen untrust-screen
  * set security zones security-zone untrust host-inbound-traffic protocols all
  * set security zones security-zone untrust interfaces ge-0/0/1.0 host-inbound-traffic system-services all
  * set security policies from-zone trust to-zone trust policy default-permit match source-address any
  * set security policies from-zone trust to-zone trust policy default-permit match destination-address any
  * set security policies from-zone trust to-zone trust policy default-permit match application any
  * set security policies from-zone trust to-zone trust policy default-permit then permit
  * set security policies from-zone trust to-zone untrust policy default-permit match source-address any
  * set security policies from-zone trust to-zone untrust policy default-permit match destination-address any
  * set security policies from-zone trust to-zone untrust policy default-permit match application any
  * set security policies from-zone trust to-zone untrust policy default-permit then permit
  * set security policies from-zone untrust to-zone trust policy default-deny match source-address any
  * set security policies from-zone untrust to-zone trust policy default-deny match destination-address any
  * set security policies from-zone untrust to-zone trust policy default-deny match application any
  * set security policies from-zone untrust to-zone trust policy default-deny then deny
  * set security policies default-policy deny-all
  * set security alg dns disable
  * set security alg ftp disable
  * set security alg h323 disable
  * set security alg mgcp disable
  * set security alg msrpc disable
  * set security alg sccp disable
  * set security alg sql disable
  * set security alg tftp disable
  * set security alg pptp disable
  * set security flow tcp-mss all-tcp mss 1300
  * set security flow tcp-session no-syn-check
  * set security flow tcp-session no-sequence-check
  * set firewall family inet filter filter1 term redirect-to-proxy from destination-port 80
  * set firewall family inet filter filter1 term redirect-to-proxy then routing-instance redirect
  * set firewall family inet filter filter1 term default then accept
  * set firewall family inet filter filter2 term 1 from source-port 80
  * set firewall family inet filter filter2 term 1 then routing-instance redirect
  * set firewall family inet filter filter2 term 2 then accept
  * 
  * [edit]
  * sinha@sinhaFirewaLL#