====== Juniper LACP and MikoTik Bonding ======




  * 
  * Juniper LACP (Aggregation / Ether Channel)
  * ---------------------------------------------
  * ** We want to use two port ge3 and ge3 for Juniper LACP
  * 
  * set chassis aggregated-devices ethernet device-count 3
  * 
  * set interfaces ge-0/0/3 ether-options 802.3ad ae1
  * set interfaces ge-0/0/4 ether-options 802.3ad ae1
  * 
  * set interfaces ae1 description AE-Interface-Tayab
  * set interfaces ae1 aggregated-ether-options lacp active periodic fast
  * set interfaces ae1 unit 0 family ethernet-switching interface-mode trunk
  * set interfaces ae1 unit 0 family ethernet-switching vlan members all
  * 
  * 
  * MikroTik Bonding
  * ------------------------
  * Goto Interface and click Bonding
  * 
  * Goto Tab "Bonding" use Slave Ports and use mode 802.3ad
{{:mikrotik:bonding.png?800|}}