* http://gponsolution.com/huawei-ma56xx-olt-command-lists.html * * * # For show the OLT list * display board 0 * * # For unregistered ONU * display ont autofind all * * * For GPON:(VLAN Profile) * * ont-srvprofile gpon profile-id 2014 profile-name "2014" * * ont-port pots adaptive eth adaptive * * port vlan eth 1 translation 2014 user-vlan 2014 * * commit * * quit * * * * ont-lineprofile gpon profile-id 2014 profile-name "2014" * * tcont 1 dba-profile-id 100 * * gem add 1 eth tcont 1 * * gem mapping 1 1 vlan 2014 * * commit * * quit * * * GPON ONU Authentication:(TAG) * ont add 0 sn-auth 4244434D62D7BD84 omci ont-lineprofile-id 1064 ont-srvprofile-id 1064 desc Test * ont port native-vlan 0 0 eth 1 vlan 1064 * service-port vlan 1064 gpon 0/15/0 ont 0 gemport 1 multi-service user-vlan 1064 * * * ====================================================================================== * * For EPON:(VLAN Profile) * * ont-srvprofile epon profile-id 1064 profile-name 1064 * ont-port pots adaptive eth adaptive * port vlan eth 1 1064 * commit * quit * * ont-lineprofile epon profile-id 1064 profile-name 1064 * * llid dba-profile-id 50 * * commit * quit * * * EPON ONU Authentication: (TAG) * ont add 0 mac-auth 00D1-9A01-03E7 oam ont-lineprofile-id 500 ont-srvprofile-id 500 * ont port native-vlan 0 1 eth 1 vlan 500 * service-port vlan 500 epon 0/1/0 ont 1 multi-service user-vlan 500 * * * # To display ont info into the pon port * interface epon 0/1 * display ont info 0 0 * * # To display ont list into the pon port * display current-configuration port 0/1/0 * * * #display mac-address port 0/15/0 ont 0 * * * * # TO find ONU * display ont info by-mac 00D1-9A01-03E7 * * * To delet a ont : * * # To display Service port of ont * display service-port port 0/1/0 ont 1 * * # Delet service port * undo service-port 2 * * # To delet a ONT * Cavenue-XPON(config)#interface epon 0/1 * * Cavenue-XPON(config-if-epon-0/1)#ont delete 0 0 * Number of ONTs that can be deleted: 1, success: 1 * * * * # for Check ONU Laser * --------------------- * Cavenue-XPON(config-if-gpon-0/15)#display ont optical-info 0 1 * ----------------------------------------------------------------------------- * ONU NNI port ID : 0 * Module type : GPON/EPON * Module sub-type : Class B+ and PX20+ * Used type : ONU * Encapsulation Type : BOSA ON BOARD * Optical power precision(dBm) : 3.0 * Vendor name : HUAWEI * Vendor rev : - * Vendor PN : HW-BOB-0002 * Vendor SN : 1429W3024356G * Date Code : 14-08-11 * Rx optical power(dBm) : -12.99 * Rx power current warning threshold(dBm): [-,-] * Rx power current alarm threshold(dBm) : [-29.0,-7.0] * Tx optical power(dBm) : 2.08 * Tx power current warning threshold(dBm): [-,-] * Tx power current alarm threshold(dBm) : [0.0,5.0] * Laser bias current(mA) : 10 * Tx bias current warning threshold(mA) : [-,-] * Tx bias current alarm threshold(mA) : [2.000,100.000] * Temperature(C) : 36 * Temperature warning threshold(C) : [-,-] * ------------------------------------------------------ * ###MA5680T_Cavenue(config-if-epon-0/9)#display port state all * --------------------- * F/S/P 0/9/0 * Optical Module status Online * Port state Online * Available bandwidth(Kbps) 997719 * Laser state Normal * Temperature(C) 37 * TX Bias current(mA) 9 * Supply Voltage(V) 3.22 * TX power(dBm) 4.83 * Illegal rogue ONT Inexistent * Max Distance(Km) 20 * Wave length(nm) 1490 * Fiber type Single Mode * Length(9ª╠m)(km) 20.0 * * ================================== * Backup: * ============ * * Backup configuration tftp 192.168.10.24 backup-configuration-10.45-26-05-2022.cfg * * Backup data tftp 192.168.10.24 backup-data-10.45-26-05-2022.dat * * Load configuration tftp 192.168.10.24 backup-configuration-10.45-26-05-2022.cfg all * * Load data tftp 192.168.10.24 backup-data-10.45-26-05-2022.dat all * * Active configuration system * HUAWEIMA5608T(config)# backup configuration tftp:10.11.104.5 backupconf.txt ///backup configuration/// * * HUAWEIMA5608T(config)# backup data tftp:10.11.104.5 bakdata.dat /////DATABASE BACKUP/// * * * RESTORE CONFIGURATION * * * HUAWEIMA5608T(config)#load configuration tftp:10.11.104.5 backupconf.txt all /////restore configuration//// * * HuAWEIMA5608T(config)#load data tftp:10.11.104.5 bakdata.dat ////restore data configuratiogn//// * * After restore the configuration * * PLEASE PROCEED WITH BELOW COMMAND ALSO * * HUAWEIMA5608T(config)# active configuration system * * * OPTIONS: * * Tftp server address : 10.11.104.5 * * Ether cable connection : main board ar Eth port thaky Laptop ar Eth port * * ========================== * OLT te VLAN TAG: * ---------------- * port vlan 2 0/17 0 * * * * *