root@mailx:/etc/smokeping/config.d# cat Alerts
* Alerts *
to = alerts@bdcom.com.bd
from = alerts@nms.bdcom.net
+bigloss
type = loss
# in percent
pattern = ==0%,==0%,==0%,==0%,>0%,>0%,>0%
comment = suddenly there is packet loss
+someloss
type = loss
# in percent
pattern = >0%,*12*,>0%,*12*,>0%
comment = loss 3 times in a row
+startloss
type = loss
# in percent
pattern = ==S,>0%,>0%,>0%
comment = loss at startup
+rttdetect
type = rtt
# in milli seconds
pattern = <10,<10,<10,<10,<10,<100,>100,>100,>100
comment = routing messed up again ?
+hostdown
type = loss
# in percent
pattern = ==0%,==0%,==0%, ==U
comment = no reply
+lossdetect
type = loss
# in percent
pattern = ==0%,==0%,==0%,==0%,>20%,>20%,>20%
comment = suddenly there is packet loss
root@mailx:/etc/smokeping/config.d# cat General
* General *
owner = BDCOM Online Ltd
contact = aminul@office.bdcom.com
#mailhost = my.mail.host
# NOTE: do not put the Image Cache below cgi-bin
# since all files under cgi-bin will be executed … this is not
# good for images.
-
# specify this to get syslog logging
syslogfacility = local0
# each probe is now run in its own process
# disable this to revert to the old behaviour
# concurrentprobes = no
@include /etc/smokeping/config.d/pathnames
root@mailx:/etc/smokeping/config.d# cat Probes
* Probes *
+ FPing
binary = /usr/bin/fping
root@mailx:/etc/smokeping/config.d#