AMINUL ISLAM SHAMIM

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

 ====== L2 Loop Protection on MikroTik interface ======
  * 
  * 
  * We can use MikroTik feature "Loop-Protect"
  * Loop protect feature can prevent Layer2 loops by sending loop protect protocol packets and shutting down interfaces in case they receive loop protect packets
  * 
  * 
  * GOTO Terminal:: enabling LOOP Protection for Ethernet
  * 
  * ## interface ethernet set loop-protect=on 2
  * 
  * 
  * *** Three values "ON", "OFF" and "Default" ... default works as turned off 
  * *** [2 is the number of Ethernet :: use command:: 'interface print'  to see the number of interfaces]
  * 
  * ** We can use it by VLAN interface also
  * 
  * ## interface vlan set loop-protect=on 3
  * 
  * loop-protect-send-interval (time interval; Default: 5m) 
  * Sets how often loop protect packets are sent on selected interface.
  * 
  * loop-protect-disable-time (time interval | 0; Default: 5m) 
  * Sets how long selected interface is disabled when loop is detected. 0 - forever.
  *