juniper_lacp_and_mikotik_bonding
Juniper LACP and MikoTik Bonding
- Juniper LACP (Aggregation / Ether Channel)
- ———————————————
- ** We want to use two port ge3 and ge3 for Juniper LACP
- set chassis aggregated-devices ethernet device-count 3
- set interfaces ge-0/0/3 ether-options 802.3ad ae1
- set interfaces ge-0/0/4 ether-options 802.3ad ae1
- set interfaces ae1 description AE-Interface-Tayab
- set interfaces ae1 aggregated-ether-options lacp active periodic fast
- set interfaces ae1 unit 0 family ethernet-switching interface-mode trunk
- set interfaces ae1 unit 0 family ethernet-switching vlan members all
- MikroTik Bonding
- ————————
- Goto Interface and click Bonding
- Goto Tab “Bonding” use Slave Ports and use mode 802.3ad
juniper_lacp_and_mikotik_bonding.txt · Last modified: 2023/03/06 11:31 by 127.0.0.1