l2_loop_protection_on_mikrotik_interface
L2 Loop Protection on MikroTik interface
- We can use MikroTik feature “Loop-Protect”
- Loop protect feature can prevent Layer2 loops by sending loop protect protocol packets and shutting down interfaces in case they receive loop protect packets
- GOTO Terminal:: enabling LOOP Protection for Ethernet
- ## interface ethernet set loop-protect=on 2
- * Three values “ON”, “OFF” and “Default” … default works as turned off * * [2 is the number of Ethernet :: use command:: 'interface print' to see the number of interfaces]
- ** We can use it by VLAN interface also
- ## interface vlan set loop-protect=on 3
- loop-protect-send-interval (time interval; Default: 5m)
- Sets how often loop protect packets are sent on selected interface.
- loop-protect-disable-time (time interval | 0; Default: 5m)
- Sets how long selected interface is disabled when loop is detected. 0 - forever.
l2_loop_protection_on_mikrotik_interface.txt · Last modified: 2023/03/06 11:31 by 127.0.0.1