AMINUL ISLAM SHAMIM

User Tools

Site Tools

Trace: • olt_conf
olt_conf
  • http://gponsolution.com/huawei-ma56xx-olt-command-lists.html
  • # For show the OLT list
  • display board 0
  • # For unregistered ONU
  • display ont autofind all
  • For GPON:(VLAN Profile)
  • ont-srvprofile gpon profile-id 2014 profile-name “2014”
  • ont-port pots adaptive eth adaptive
  • port vlan eth 1 translation 2014 user-vlan 2014
  • commit
  • quit
  • ont-lineprofile gpon profile-id 2014 profile-name “2014”
  • tcont 1 dba-profile-id 100
  • gem add 1 eth tcont 1
  • gem mapping 1 1 vlan 2014
  • commit
  • quit
  • GPON ONU Authentication:(TAG)
  • ont add 0 sn-auth 4244434D62D7BD84 omci ont-lineprofile-id 1064 ont-srvprofile-id 1064 desc Test
  • ont port native-vlan 0 0 eth 1 vlan 1064
  • service-port vlan 1064 gpon 0/15/0 ont 0 gemport 1 multi-service user-vlan 1064
  • ======================================================================================
  • For EPON:(VLAN Profile)
  • ont-srvprofile epon profile-id 1064 profile-name 1064
  • ont-port pots adaptive eth adaptive
  • port vlan eth 1 1064
  • commit
  • quit
  • ont-lineprofile epon profile-id 1064 profile-name 1064
  • llid dba-profile-id 50
  • commit
  • quit
  • EPON ONU Authentication: (TAG)
  • ont add 0 mac-auth 00D1-9A01-03E7 oam ont-lineprofile-id 500 ont-srvprofile-id 500
  • ont port native-vlan 0 1 eth 1 vlan 500
  • service-port vlan 500 epon 0/1/0 ont 1 multi-service user-vlan 500
  • # To display ont info into the pon port
  • interface epon 0/1
  • display ont info 0 0
  • # To display ont list into the pon port
  • display current-configuration port 0/1/0
  • #display mac-address port 0/15/0 ont 0
  • # TO find ONU
  • display ont info by-mac 00D1-9A01-03E7
  • To delet a ont :
  • # To display Service port of ont
  • display service-port port 0/1/0 ont 1
  • # Delet service port
  • undo service-port 2
  • # To delet a ONT
  • Cavenue-XPON(config)#interface epon 0/1
  • Cavenue-XPON(config-if-epon-0/1)#ont delete 0 0
  • Number of ONTs that can be deleted: 1, success: 1
  • # for Check ONU Laser
  • ———————
  • Cavenue-XPON(config-if-gpon-0/15)#display ont optical-info 0 1
  • —————————————————————————–
  • ONU NNI port ID : 0
  • Module type : GPON/EPON
  • Module sub-type : Class B+ and PX20+
  • Used type : ONU
  • Encapsulation Type : BOSA ON BOARD
  • Optical power precision(dBm) : 3.0
  • Vendor name : HUAWEI
  • Vendor rev : -
  • Vendor PN : HW-BOB-0002
  • Vendor SN : 1429W3024356G
  • Date Code : 14-08-11
  • Rx optical power(dBm) : -12.99
  • Rx power current warning threshold(dBm): [-,-]
  • Rx power current alarm threshold(dBm) : [-29.0,-7.0]
  • Tx optical power(dBm) : 2.08
  • Tx power current warning threshold(dBm): [-,-]
  • Tx power current alarm threshold(dBm) : [0.0,5.0]
  • Laser bias current(mA) : 10
  • Tx bias current warning threshold(mA) : [-,-]
  • Tx bias current alarm threshold(mA) : [2.000,100.000]
  • Temperature(C) : 36
  • Temperature warning threshold(C) : [-,-]
  • ——————————————————
  • ###MA5680T_Cavenue(config-if-epon-0/9)#display port state all
  • ———————
  • F/S/P 0/9/0
  • Optical Module status Online
  • Port state Online
  • Available bandwidth(Kbps) 997719
  • Laser state Normal
  • Temperature(C) 37
  • TX Bias current(mA) 9
  • Supply Voltage(V) 3.22
  • TX power(dBm) 4.83
  • Illegal rogue ONT Inexistent
  • Max Distance(Km) 20
  • Wave length(nm) 1490
  • Fiber type Single Mode
  • Length(9ª╠m)(km) 20.0
  • ==================================
  • Backup:
  • ============
  • Backup configuration tftp 192.168.10.24 backup-configuration-10.45-26-05-2022.cfg
  • Backup data tftp 192.168.10.24 backup-data-10.45-26-05-2022.dat
  • Load configuration tftp 192.168.10.24 backup-configuration-10.45-26-05-2022.cfg all
  • Load data tftp 192.168.10.24 backup-data-10.45-26-05-2022.dat all
  • Active configuration system
  • HUAWEIMA5608T(config)# backup configuration tftp:10.11.104.5 backupconf.txt /backup configuration/
  • HUAWEIMA5608T(config)# backup data tftp:10.11.104.5 bakdata.dat /DATABASE BACKUP/ * * * RESTORE CONFIGURATION * * * HUAWEIMA5608T(config)#load configuration tftp:10.11.104.5 backupconf.txt all /restore configuration * * HuAWEIMA5608T(config)#load data tftp:10.11.104.5 bakdata.dat restore data configuratiogn * * After restore the configuration * * PLEASE PROCEED WITH BELOW COMMAND ALSO * * HUAWEIMA5608T(config)# active configuration system * * * OPTIONS: * * Tftp server address : 10.11.104.5 * * Ether cable connection : main board ar Eth port thaky Laptop ar Eth port * * ========================== * OLT te VLAN TAG: * —————- * port vlan 2 0/17 0 * * * * *
olt_conf.txt · Last modified: 2023/03/06 11:31 by 127.0.0.1